Frequently Asked Questions:

How can I properly calibrate the oscillator frequency of my Behringer Crave synthesizer to ensure accurate and stable pitch output?

Calibrating the oscillator frequency on your Behringer Crave synthesizer is an important step to ensure accurate and stable pitch output. Here's a simple process to do it:

1. Connect an external audio source, such as a tuner or oscilloscope, to the Audio Input jack of the Crave. You can also use headphones if you don't have access to an external device. Turn on your synthesizer and set it to its default factory settings. This can be done by holding down the RESET button for three seconds until the display shows "INIT". Press the EXIT button to exit the setup mode. Navigate to the OSCILLATOR section using the corresponding buttons in the lower left-hand corner of the Crave's front panel. Select the oscillator you want to calibrate (OSC1, OSC2, or SUB). You can do this by pressing the corresponding button under the display. Set the oscillator mode to "SINE" using the MODE button above the display. This will ensure a pure and stable waveform for the calibration process. Press the SHIFT button once (it will flash) to enter Fine Tune Mode. This allows you to make fine adjustments to the oscillator frequency. Press the UP or DOWN arrow button on the front panel to change the Fine Tune value in 1 Hz steps. Use your audio source or headphones to monitor the pitch. Adjust the Fine Tune value until you hear the closest match to your external reference tone (e. Hz tuning frequency). Note down this Fine Tune value for later use as a reference. Press the SHIFT button again to exit Fine Tune Mode. Save the calibrated oscillator frequency by pressing the WRITE button at the lower left-hand corner of the front panel. Repeat steps 5-9 for any other oscillators you want to calibrate, and save their frequencies using the WRITE button as well. Finally, test your synthesizer's pitch accuracy by playing a simple melody or chord progression on it and verifying that all notes sound correct in relation to each other. By following these steps, you should be able to calibrate the oscillator frequency of your Behringer Crave for accurate and stable pitch output.

What is the unique power clocking frequency of the Behringer Crave Synthesizer?

The Behringer Crave Synthesizer has a unique clocking frequency of 18. A2A Hz (Arpeggio Time).

How does the analog filter design in the Behringer Crave differ from other classic analog filters, and how can it be manipulated to achieve unique sonic textures?

The Behringer Crave's analog filter is designed using a 12dB/oct low-pass filter with resonance. While this is a common configuration found in many classic analog filters, the Crave's implementation stands out due to its high degree of accuracy and stability. The filter can be manipulated using several parameters, including frequency, resonance, envelope depth, and key tracking. The frequency parameter allows for sweeping through various frequencies, while resonance adds a self-oscillation effect that can create unique and interesting textures. By adjusting the envelope depth, the filter response can be made more or less sensitive to input signals, allowing for further tonal shaping. Key tracking enables the filter to follow the pitch of an external source, such as another synth or a vocal performance, adding harmonic complexity and dynamic range. By combining these parameters in various ways and adjusting them in real-time, it's possible to achieve a wide variety of sonic textures, from subtle filter sweeps to dramatic self-oscillations and everything in between. Experimentation is key, as the Crave's filter is capable of producing both classic and unconventional sounds that can add depth and character to any production or performance.

How can I optimize the sonic capabilities of a Behringer Crave synthesizer to create unique and innovative sounds that stand out in live performances or studio recordings?

To optimize the sonic capabilities of a Behringer Crave synthesizer for creating unique and innovative sounds, follow these steps:

1. Explore the oscillator section: The Crave's oscillators offer a wide range of waveforms, including classic analog waveforms like sawtooth, triangle, pulse, and noise as well as digital waveforms like square, ramp, and sinusoid. Mix different oscillator types to create complex sounds. Use the filter section: The Crave's 12dB/oct low-pass filter offers both resonant and non-resonant modes. Experiment with cutting and boosting frequencies to create unique tonal character. Utilize the envelopes: The Crave has two envelope generators, one for the filter and one for amplification. Use them to add movement and expression to your sounds. Try modulating the cutoff frequency or resonance parameters with these envelopes. Apply LFOs: The Crave features two LFOs that can be used to create rhythmic or modulation effects. For example, you could use an LFO to modulate the filter cutoff frequency to create a wobbling effect. Incorporate effects: The Crave includes a reverb, delay, and chorus/flanger effects section that can be used to add depth and space to your sounds. Be creative with these effects, but make sure they don't overpower the original sound. Record automation: The Crave has an arpeggiator, which allows you to program complex melodic patterns. Additionally, it supports MIDI synchronization, enabling you to sync its arpeggiator and sequencer with other MIDI devices or software. Try recording automation to capture your performance in real-time. Listen carefully: Lastly, make sure to listen critically to the sounds you create. Use headphones to hear every detail of your creations, and adjust the settings until you're satisfied with the result. Remember, when creating sounds with a Behringer Crave synthesizer, there are no hard and fast rules.

Related products

• 

  Roland Juno-DS88

  Rated 3.00 out of 5
  $695.99 Add to cart
  Compare
• 

  Roland Juno-DS61

  Rated 4.00 out of 5
  $495.99 Add to cart
  Compare
• 

  Korg SQ-1

  Rated 4.00 out of 5
  $16.99 Add to cart
  Compare
• 

  Korg Minilogue XD Module

  Rated 4.00 out of 5
  $415.99 Add to cart
  Compare