Question 1

How do I program the unique voice architecture of the Pro 3 Mono/Paraphonic Synthesizer to achieve rich, complex sounds?

Accepted Answer

To program the unique voice architecture of the Pro 3 Mono/Paraphonic Synthesizer and achieve rich, complex sounds, follow these steps:
1. Start by selecting either mono or paraphonic mode using the Mode switch. In mono mode, only one note can be played at a time, while in paraphonic mode, multiple notes can be played simultaneously. Choose a sound source for each oscillator by selecting one of the available waveforms from the Oscillator 1, Oscillator 2, and/or Oscillator 3 sections. You can also use the Ring Modulator to combine two sources or the Noise generator for white or pink noise. Use the various modulation options to shape your sound. The Envelope Generators (ADSR) allow you to control aspects such as filter cutoff, resonance, and amplitude over time. You can also use the LFOs (Low Frequency Oscillators) to add movement and rhythmic patterns to your sounds. The Pro 3 features a unique dual-filter design that allows you to manipulate your sound in unexpected ways. Try using both filters simultaneously, or experiment with different filter types like lowpass, highpass, bandpass, notch, and peak. Use the Effects section to add reverb, delay, distortion, chorus, phaser, flanger, and other processing effects to your sound. These can be used in parallel, series, or mid/side configurations. Save your patches using the Pro 3's built-in patch storage system. This allows you to easily recall your favorite sounds and settings for future use. Finally, don't be afraid to experiment with different settings and parameters! The Pro 3 offers a wide range of options and possibilities, so have fun exploring and discovering new sounds.

Question 2

How does the Pro 3's mono/paraphonic architecture contribute to its unique sound compared to traditional polyphonic synthesisers?

Accepted Answer

The Pro 3's mono/paraphonic architecture sets it apart from traditional polyphonic synthesizers in terms of its unique sound. In a polyphonic synthesizer, multiple notes can be played simultaneously, while a monophonic synth can only produce one note at a time. However, the Pro 3's paraphonic design allows each voice to have its own envelope generator and filter cutoff, allowing for more complex and varied sounds than a traditional mono synth. This also makes it easier to create rich, complex textures that would be difficult to achieve with a standard polyphonic setup. The Pro 3's architecture contributes to its versatility and expressiveness, making it a powerful tool for both classic analog and modern digital sounds.

Question 3

How can I effectively utilize the mono and paraphonic modes on the Pro 3 synthesizer to achieve distinct tonal qualities in my compositions?

Accepted Answer

To effectively utilize the mono and paraphonic modes on the Pro 3 synthesizer to achieve distinct tonal qualities in your compositions, you should follow these steps:

1. Understand the difference between mono and paraphonic modes:
- Mono mode allows each oscillator to trigger only one note at a time, resulting in a thicker and more powerful sound. It's ideal for basses, leads, and other low-frequency sounds. Paraphonic mode, on the other hand, allows all oscillators to trigger simultaneously, resulting in a brighter and more complex sound. It's perfect for chords, pads, and other high-frequency sounds. Choose the right mode for each sound:
- For basses and leads, use mono mode to create a fuller and more powerful sound. For chords, pads, and other high-frequency sounds, use paraphonic mode to create a brighter and more complex sound. Use the filter section to shape your tone:
The Pro 3's filter section allows you to further sculpt your sounds in both mono and paraphonic modes. Here are some tips for using the filter:
- In mono mode, use the filter to create a sharp and focused sound. You can also use it to add some grit or warmth to your basses and leads. In paraphonic mode, use the filter to create a brighter and more complex sound. You can experiment with different filter types (low pass, high pass, band pass, etc. Use the envelope section to add movement:
The Pro 3's envelope section allows you to add movement and dynamics to your sounds. Here are some tips:
- In mono mode, use the envelope to create a punchy and rhythmic sound. You can experiment with different attack, decay, sustain, and release settings to find the right amount of movement for your basses and leads. In paraphonic mode, use the envelope to create a brighter and more complex sound. You can also use it to add some variation to your chords and pads by using different envelope shapes (ADSR, AR, ASR). Utilize the sequencer section for added complexity:
The Pro 3's sequencer section allows you to create complex and evolving sounds. Here are some tips:
- In mono mode, use the sequencer to add some variation to your basses and leads. You can create rhythmic patterns by using different step sizes and gate lengths. In paraphonic mode, use the sequencer to create a more complex sound. You can also use it to modulate other parameters, such as oscillator frequency or filter cutoff. Remember that the key to utilizing these modes effectively is experimentation.

Product name	Pro 3 Mono/Paraphonic Synthesizer
Type	Synthesizers

Pro 3 Mono/Paraphonic Synthesizer

Description