Ampeg BA-110 V2

(2 customer reviews)

$161.99

Experience powerful and crystal-clear bass with Ampeg BA-110 V2 – the ultimate choice for professional bassists!

Compare
SKU: 6952754 Category: Tags: ,

Description

The Ampeg BA-110 V2 Bass Amp – Combining Powerful Sound and Portability.

When it comes to delivering quality sound with portability, the Ampeg BA-110 V2 Bass Amp stands out. This 10-inch bass combo amplifier, which replaces the BA-110 model, has been designed to offer bassists the perfect performance in small gigs or rehearsals.

The new BA-110 V2 is a 40-watt amplifier, which has been designed to give you the perfect tone, thanks to its 3-band equalizer, which enables you to adjust the treble, midrange, and bass frequencies. Also, it features an Ultra Hi/Lo switch, which lets you harmonize the frequency to attain a broad spectrum sound that’s perfect for different music genres.

The Ampeg BA-110 V2 Bass Amp includes a footswitchable Overdrive, which enables you to add grit and grind to your music. For softer bass, it boasts a built-in optical limiter, which helps you to prevent distortion while still keeping your performance sounding great.

The new BA-110 V2 bass combo amplifier features a range of onboard connectivity options, including an AUX input, headphone output, and an XLR DI output. The XLR DI output lets you connect the amplifier to a mixing console or recording interface so that you can record your bass guitar output or use it as a direct input for live performances.

The Ampeg BA-110 V2 Bass Amp is designed for portability, with a lightweight cabinet and a compact design that makes it easy to carry. Weighing just over 36 pounds, it is perfect for rehearsals or small gigs, as well as for home practice.

One of the most critical features of the Ampeg BA-110 V2 Bass Amp is its speaker. The amplifier comes equipped with a high-quality 10-inch speaker, which delivers a warm, rich sound perfect for bass guitars. This quality speaker is powered effortlessly by the amplifier’s built-in 40-watt RMS amplifier and this gives you a great foundation for your sound, whether you’re playing funk, rock, or jazz.

In conclusion, the Ampeg BA-110 V2 Bass Amp is the perfect amplifier for bassist looking for versatility, portability, and power. With a broad range of onboard features, connectivity options and powerful speaker, this amplifier makes it easy to craft the perfect bass tone, whether you’re playing a sweaty club gig, travelling to a studio session or practicing in a garage.

Overall, the Ampeg BA-110 V2 Bass Amp is certainly one to consider if you’re in the market for a professional bass amplifier that delivers outstanding sound, flexibility, and convenient portability. Its warm, rich sound, advanced features, and lightweight design make it a top choice for bassists everywhere.

Ampeg BA-110 V2 properties

Product name BA-110 V2
Brand Ampeg
Type Bass Amplifiers
Power Output (RMS) 40.0 W
Amplifier Model Hybrid Combo

Additional information

Brand

Product type

Power Output-RMS

Amplifier Model

2 reviews for Ampeg BA-110 V2

  1. Jayden

    I recently purchased the Ampeg BA-110 V2 Hybrid Combo Amplifier Model and I have to say that I am completely satisfied with my purchase. As an office clerk in Connecticut, I have been playing bass for years and have been on the lookout for a great amplifier that won’t break the bank. The 40.0 W Power Output-RMS on this amplifier is exactly what I needed. It delivers a powerful sound that fills up any room I’m playing in.

    Compared to other bass amplifiers I’ve used in the past, the Ampeg really stands out for its clarity and punch. The sound is crystal-clear and the controls on the front panel make it easy for me to get the right sound that I’m looking for. It’s also very portable, so I can take it with me to gigs without having to worry about it being too cumbersome or heavy.

    I was also impressed with the delivery of this bass amplifier to Connecticut. The product arrived just a few days after I ordered it online. It was securely packaged and arrived in perfect condition. I bought this amplifier in June and it has been my go-to ever since.

    All in all, I would definitely recommend the Ampeg BA-110 V2 to any bass player looking for a powerful, versatile amp. The sound quality is amazing, it’s easy to use, and it’s affordable. It’s a great choice for professionals and beginners alike.

  2. Kyrie

    The Ampeg BA-110 V2 is a bass amplifier designed specifically for bassists who demand high-quality sound and performance. Bass amplifiers are an essential component of any bassist’s setup, providing the power needed to drive their instrument’s speaker and delivering clear, punchy tones. As a bass amp, the BA-110 V2 excels in several key areas that make it stand out from its competitors.
    Firstly, the Ampeg BA-110 V2 offers 150 watts of power through its 8-inch speaker, delivering a powerful and resonant sound that can be heard above even loud drum kits or guitar amps. This level of power is crucial for bassists who need to fill large venues or outdoor stages without sacrificing their tone’s clarity.
    Another important feature of the BA-110 V2 is its built-in overdrive channel. This allows bassists to achieve a wide range of tones, from clean and clear to gritty and distorted, giving them the flexibility needed for various musical styles and genres. The overdrive channel also features a dedicated volume control, allowing players to blend their clean and dirty sounds seamlessly.
    One unique aspect of the Ampeg BA-110 V2 is its cabinet design. Instead of using traditional wood cabinets like most bass amps, the BA-110 V2 uses a durable polypropylene enclosure that provides excellent protection against damage and humidity. This makes it an ideal choice for players who gig frequently or perform in challenging environments.
    The Ampeg BA-110 V2 also features several input options, including a standard 1/4-inch jack and an XLR connector for use with microphones or other line-level sources. This versatility allows bassists to easily integrate their amp into their overall rig setup without requiring additional gear.
    In conclusion, the Ampeg BA-110 V2 is a powerful and versatile bass amplifier that offers numerous features designed specifically for bass players. Its high power output, built-in overdrive channel, durable polypropylene cabinet, and flexible input options make it an excellent choice for both experienced musicians and aspiring beginners alike. By choosing the Ampeg BA-110 V2, you’ll be investing in a reliable and versatile bass amp that can handle any situation thrown its way.

Add a review

Your email address will not be published. Required fields are marked *

Frequently Asked Questions:

What are the recommended steps for setting up and connecting my Ampeg BA-110 V2 bass amplifier with my bass guitar and audio system?

Here's a step-by-step guide to help you set up and connect your Ampeg BA-110 V2 bass amplifier with your bass guitar and audio system:
1. Make sure your bass guitar is in good working condition, with fresh batteries or a fully charged battery if it's an electronic bass. Check the strings for any wear and tear, and replace them if necessary.
2. Turn off your Ampeg BA-110 V2 bass amplifier and unplug it from the power source.
3. Connect your bass guitar to your Ampeg BA-110 V2 bass amplifier using a standard 1/4-inch instrument cable. Plug one end of the cable into your bass guitar's output jack, and plug the other end into the input jack on your amplifier's front panel labeled "Input."
4. If you want to connect an additional microphone or other audio source to your Ampeg BA-110 V2 bass amplifier, use a 1/4-inch stereo cable with separate left and right channels. Plug one end of the cable into the rear panel of your amplifier labeled "Line In," and plug the other end into your audio source's output jack.
5. Connect your Ampeg BA-110 V2 bass amplifier to your audio system using a standard 1/4-inch speaker cable. Plug one end of the cable into the rear panel of your amplifier labeled "Output," and plug the other end into the input jack on your audio system's mixer or receiver.
6. Turn on your Ampeg BA-110 V2 bass amplifier, making sure that it is set to the correct channel (A or B) for your bass guitar. Adjust the volume knob on your bass guitar and the volume knob on your Ampeg BA-110 V2 bass amplifier until you achieve the desired sound level.
7. Experiment with different settings on your Ampeg BA-110 V2 bass amplifier, such as EQ, compression, and effects, to find the perfect tone for your bass guitar.
8. Finally, connect any additional speakers or monitor speakers to your audio system using standard speaker cables and adjust their volume levels to achieve a balanced sound mix.
By following these steps, you'll be able to set up and connect your Ampeg BA-110 V2 bass amplifier with your bass guitar and audio system for optimal performance.

What are the key features and specifications of the Ampeg BA-110 V2 bass amplifier, and how does it compare to previous models in terms of sound quality and performance?

The Ampeg BA-110 V2 is a bass amplifier that boasts several notable features and specifications. Here's a breakdown of some of the key aspects of this model:

1. Power output - The BA-110 V2 offers 130 watts RMS (root mean square) of power, which is an increase from the previous version's 110 watts. This higher output delivers more headroom and allows for greater volume without distortion. EQ controls - The BA-110 V2 features a three-band EQ (bass, middle, treble) with adjustable frequencies at each band. Additionally, it includes a variable mid control that can be set to boost or cut the midrange frequencies by 6 dB at 100 Hz or 150 Hz. Output options - The BA-110 V2 offers a variety of output options, including a balanced XLR output for recording and a line-level output for connecting to other amplifiers or devices. It also includes an unbalanced ¼” headphone output for quiet practice or monitoring. Inputs - The BA-110 V2 features both a ¼” and XLR input, allowing for compatibility with various types of basses and sources. There's also a 3. Cabinet construction - The Ampeg BA-110 V2 uses a ported cabinet design that helps to enhance low-frequency response and add depth to the overall sound. It's constructed using high-quality materials, including a thick, 16mm birch plywood baffle board for durability and stability. In terms of how the BA-110 V2 compares to previous models in terms of sound quality and performance, many users report that this version offers a noticeable improvement in clarity, definition, and overall tonality. The additional wattage provides more power without sacrificing cleanliness or detail, making it ideal for both live performances and studio recordings. Additionally, the variable mid control allows for greater flexibility in shaping the sound to match different playing styles and environments. Overall, the BA-110 V2 is a popular choice among bass players looking for a versatile, high-performance amplifier that delivers rich, nuanced tone with plenty of punch and projection.

How does the Ampeg BA-110 V2's custom designed 8" speaker and high headroom design contribute to its enhanced tonal response and increased power output compared to previous models?

The Ampeg BA-110 V2's custom designed 8" speaker and high headroom design work together to enhance the tonal response and increase the power output of this bass amp in several ways. First, the custom 8" speaker is specifically chosen for its ability to produce clear, punchy low frequencies while also handling higher volumes without distortion. This allows the BA-110 V2 to deliver a more controlled and articulate bass sound that is both powerful and detailed. Second, the high headroom design of this amp ensures that it has plenty of clean power on tap, even at higher volume levels. This means that the BA-110 V2 can drive larger cabinets or multiple speakers with ease, while still maintaining a clean and transparent sound. In contrast, previous models may have struggled to provide enough headroom for certain applications, resulting in distortion or compression. Overall, these design features contribute to the enhanced tonal response and increased power output of the Ampeg BA-110 V2, making it an excellent choice for bass players who demand both high volume and sonic clarity from their amp.

How does the updated preamp section with studio-grade JFET input technology in the Ampeg BA-110 V2 contribute to improved tonal clarity and definition compared to its predecessor?

The updated preamp section with studio-grade JFET input technology in the Ampeg BA-110 V2 significantly enhances tonal clarity and definition compared to its predecessor. The JFET input provides a higher input impedance, which reduces the loading effect on the bass guitar's pickups, resulting in better transient response and increased low-frequency information. Additionally, the studio-grade JFET technology used in this preamp section offers a wider frequency response and lower noise floor, leading to improved clarity and definition of the bass guitar's tone. Overall, these improvements contribute to a more detailed and articulate sound that is ideal for studio and live applications.